You've just unboxed your new heater, it's 6 AM, your home office is freezing, and the last thing you want is to squint at a tiny instruction booklet. This guide walks you through everything you need to know about how to use the Aikoper Space Heater — from first plug-in to dialing in your perfect temperature — so you can get warm in about 3 seconds flat.
The Aikoper Space Heater is a 1500W ceramic tower heater built around PTC heating technology. Whether you're working from home, heating a bedroom, or just trying to take the chill off a small apartment, understanding the settings properly makes a real difference in both comfort and energy use.
First-Time Setup: Getting Started with Aikoper Space Heater Instructions
Before you start blasting heat, take two minutes to do this right.
Unboxing and placement:
- Remove all packaging material, including any foam inserts inside the unit
- Place the heater on a flat, hard floor surface — not carpet if you can help it
- Keep at least 3 feet of clearance on all sides, especially away from curtains, furniture, and bedding
- Plug directly into a wall outlet — avoid extension cords and power strips
Power on:
- Press the Power button on the top panel or the remote
- The display will light up showing the current mode and temperature setting
- You'll feel warm airflow within 3 seconds thanks to the PTC ceramic element
Pro tip: The first time you run it, let it run on high for 5 minutes in a ventilated space. New heaters occasionally have a faint smell from the manufacturing process — this is normal and clears quickly.
Understanding the Aikoper Heater Settings and Modes
This is where most people get confused. The Aikoper has multiple modes, and it helps to know what each one actually does.
Heat modes:
- Low (750W): Good for maintaining a room that's already warm, or for smaller spaces under 100 sq ft
- High (1500W): Full power for fast warmth — use this when you first walk into a cold room
- Eco Mode: The heater monitors room temperature and cycles between low and off to hold a comfortable range without running constantly
Fan-only mode: Runs the fan without heat. Useful in mild weather when you just want air circulation.
Temperature range: You can set your target temperature between 60°F and 95°F (15°C–35°C) in 1-degree increments. Once the room hits your target, the heater throttles back automatically.
Pro tip: Set eco mode to 68–70°F for a home office. You'll barely notice it running, and your electricity bill will thank you.
How to Use the Remote Control and Timer
The remote is one of the Aikoper Space Heater's most practical features — especially when the unit is across the room or you're already in bed.
Remote basics: - Works within approximately 20 feet line-of-sight - Mirrors every function available on the top panel - Requires 2 AAA batteries (usually included)
Setting the programmable timer:
- Press the Timer button on the remote or panel
- Use the +/– buttons to select a shutoff time between 1 and 12 hours
- The display will show a countdown
- Press Timer again to confirm
This is incredibly useful for falling asleep with the heater on. Set it for 2 hours, and it shuts itself off automatically — no waking up sweaty at 3 AM.
Child lock: Hold the lock button for 3 seconds to activate. The panel buttons stop responding, but the remote still works. Great if you have curious kids or pets nearby.
Safety Features You Should Know About
The Aikoper is built with several protections that work quietly in the background. Knowing they exist — and what they do — helps you use the heater with confidence.
Tip-over protection: If the heater gets knocked over, it shuts off within seconds automatically. To reset it, simply stand it upright and press the power button.
Overheat protection: Built-in thermal sensors monitor internal temperature. If the unit gets too hot (usually from blocked airflow), it cuts power automatically. Check for obstructions around the vents before restarting.
Cool-touch housing: The outer shell stays relatively cool even when running on high, reducing burn risk if someone brushes against it.
Pro tip: Never run the heater in a bathroom or anywhere with direct moisture exposure. It's not rated for humid environments and doing so voids the safety protections.
Getting the Most Out of Eco Mode and Energy Savings
A lot of people buy this heater and never touch eco mode. That's leaving money on the table.
Here's how to use it effectively:
- Pre-heat first: Run on high for 10–15 minutes to bring the room up to temperature
- Switch to eco: Once you're comfortable, switch to eco mode at your target temperature
- Close the room: Shut doors to keep heat in — the Aikoper is optimized for spaces up to 200 sq ft
- Use the timer: If you heat a room before you enter it, a 1-hour timer is usually enough
At 1500W maximum draw, running the heater continuously for 8 hours costs roughly $1.44–$1.92 depending on your local electricity rate. Eco mode can cut that by 30–50% in a well-insulated room.
FAQ
Q: Why is my Aikoper Space Heater not turning on?
Check that it's plugged directly into a wall outlet (not a power strip) and that the outlet has power. If the unit recently tipped over, it may need to be stood upright and the power button pressed to reset the tip-over protection.
Q: What temperature should I set the Aikoper heater to for a bedroom?
Most people find 68–72°F comfortable for sleeping. Set eco mode to 68°F and use the 2-hour timer to have it shut off after you've fallen asleep.
Q: Can I leave the Aikoper Space Heater on overnight?
Yes, with the timer set. Running any space heater unattended for extended periods without a shutoff isn't recommended — use the 1–12 hour timer to give yourself peace of mind.
Q: How do I use the Aikoper heater without the remote?
Every function on the remote is replicated on the top panel control buttons. Power, mode, temperature, timer, and child lock are all accessible without the remote.
Q: Why does my Aikoper heater smell the first time I use it?
New PTC ceramic heaters occasionally emit a mild odor during the first few uses as manufacturing residues burn off. Run it on high for 10–15 minutes in a ventilated space and the smell disappears permanently.
Wrapping Up
The Aikoper Space Heater is straightforward once you know what each setting does. Start on high to warm the room fast, switch to eco mode to maintain comfort without running full power, set your timer, and let the safety features do their thing in the background. That's really the whole playbook.
If you haven't picked one up yet, the Aikoper Space Heater is worth checking out — particularly for home offices and apartment spaces where you need quick, quiet heat without permanently cranking the thermostat.
For more heating guides and product reviews, visit our homepage.